Husqvarna 129R
Husqvarna 129R – a brushcutter with a powerful 27cc engine for efficient trimming and clearing. It comes with both a trimmer head and a grass blade, making it a versatile tool for different tasks. Smooth and quick start with minimal effort is made possible by the Smart Start® feature, and the stop switch that automatically resets to the ON position after it has been used. 129R also comes with a double harness, combination guard and a bullhorn handle.
With the Rapid Replace™ trimmer head, you can easily reload the trimmer line without opening the cover.
With the Rapid Replace™ trimmer head, you can easily reload the trimmer line without opening the cover. To refill, pull the line through the trimmer head and turn the knob.
Specially-designed engine and starter for easy and fast starting with minimum effort
Specially-designed engine and starter for easy and fast starting with minimum effort. Resistance in the starter cord is reduced by up to 40%.
When the stop switch has been used, it is automatically reset to ON to facilitate the next start.
When the machine is turned off, the stop button automatically returns to the start position for trouble free starting.
Straight shaft for extended reach
Straight shaft for extended reach.
Air purge removes air from carburetor and fuel system for easy starting
Air purge for very easy starting.
Standard double harness for lighter brushcutters provides a comfortable working position.
Standard double harness for lighter brushcutters provides a comfortable working position. The weight is distributed evenly over the shoulders and the harness is padded for extra convenience.
Transparent fuel tank makes it easy to check the fuel level.
See-through fuel tank for viewing fuel level.
Soft handles for optimal comfort. The bar handle makes turning and using the trimmer at different angles easy.
Soft handles for optimal comfort. The bar handle makes turning and using the trimmer at different angles easy.
All controls are designed to be easy to understand and use.
All controls are designed to be easy to understand and use.
Bevel gear designed for optimal cutting performance.
Bevel gear designed for optimal cutting performance. It provides high torque and ensures the correct angle so that the cutting equipment is kept parallel to the ground.
| Engine | |
| Clutch engagement speed (±120) | 4200 rpm |
| Cylinder displacement | 27.6 cm³ |
| Electrode gap | 0.5 mm |
| Fuel consumption | 495 g/kWh |
| Fuel tank volume | 0.34 l |
| Idling speed | 2800 rpm |
| Maximum power speed | 8000 rpm |
| Maximum rpm output shaft | 7200 rpm |
| Output shaft thread | M10x1.25V |
| Power output | 0.85 kW |
| Spark Plug | NGK CMR6A |
| Torque, max. | 1.1 Nm |
| Torque, max. at rpm | 6000 rpm |
| Transmission | |
| Drive gear angle | 30 ° |
| Gear ratio | 0.68 |
| Vibration | |
| Equivalent vibration level (ahv, eq) front handle | 5.89 m/s² |
| Equivalent vibration level (ahv, eq) rear handle | 4.6 m/s² |
| Emission | |
| Exhaust emissions (CO average) EU | 43.3 g/kWh |
| Exhaust emissions (CO average) CARB | 30.3 g/kWh |
| Exhaust emissions (CO average) EPA | 30.3 g/kWh |
| Exhaust emissions (HC average) EU | 28.2 g/kWh |
| Exhaust emissions (HC average) CARB | 31.56 g/kWh |
| Exhaust emissions (HC average) EPA | 31.56 g/kWh |
| Exhaust emissions (NOx average) EU | 2.1 g/kWh |
| Exhaust emissions (NOx average) CARB | 1.82 g/kWh |
| Exhaust emissions (NOx average) EPA | 1.82 g/kWh |
| Equipment | |
| Grass blade | Grass 255-4 |
| Harness | Standard double harness |
| Saw blade | Not included |
| Trimmer head | R25 |
| Lubricant | |
| Lubricant type (bevel gear) | Mineral grease |
| Lubricant type (Engine) | Husqvarna 2 stroke or equiv. at 50:1 |
| Sound and Noise | |
| Sound power level, guaranteed (LWA) | 114 dB(A) |
| Sound power level, measured | 106 dB(A) |
| Sound pressure level at operators ear | 94 dB(A) |
| Dimensions | |
| Tube diameter | 25.4 mm |
| Tube length | 1483 mm |
| Weight (excl. cutting equipment) | 5.4 kg |